| Material |
: Unplasticised (PVC-U) and high impact resistant rigid PVC extruded material corresponding to DIN 7748 type 3534 |
| Section Wall Thickness |
: upto 3mm ± 0.2mm |
| Glazing |
: Single or double fully insulated, noise reduction and thermal protection glazing |
| Drainage System |
: Ensure drainage slaughts are not blocked by dirt & dust. |
| Weather Performance |
: In accordance with British Standard BS 6375 Part 1 1983 |
| Colour Constancy |
: Corresponding to DIN 53388-8 |
| Installation |
: Frames can be fitted direct to any structure by means of anchor fasteners |
| Fittings |
: Continental integral fittings |
| Mounting of Fittings |
: via screw channels or steel reinforced profiles |
| Reinforcement |
: Because of the material's"low modulus of elasticity (2500-3000 N/mm2) sections are reinforced with galvanized steel sections linked to the PVC-U sections above certain sizes. |
| Frame Joints |
: Corners welded. Transoms / Mullions Mechanically joined. |
| Profile Colour |
: Natural White |
| Weather Sealing |
: Double sealed with black EDPM weather strips |
| Window Configurations |
: Casement (internally or externally beaded), Top Hung, Arch Window, Sliding Window & Designer Window Door Configurations, Hinged Doors, Swing Doors and Pivot Doors |
| Finish of Profile |
: Natural, painting is optional |
| Servicing |
: a. PVC frames can be cleaned with mild detergent and water. |
| |
b. Occasional lubrication of fittings |
| |
c. Ensure drainage slots are unobserved |
